Products

Hills Reliance 7 Relay Output Expander

Hills Reliance 8 Open Collector Output Expander

Ethernet communication module, mobile  |  F.01U.332.307 Supports mobile app communication for AMAX and Solution Series control panels Full two-...

Loudspeaker line monitoring without additional cabling Open-circuit fault detection Compatible with 100 V and 70 V loudspeaker lines Powering of t...

3G/4G Plug-In Communicator Interface Module  |   F.01U.332.308 Supports mobile app communication for AMAX and Solution Series control panels Fu...

Wireless Receiver SDI2 Bus Interface F.01U.383.394 Dual internal antennas provide spatial and polar RF signal reception for high reliability Cove...

1 Amp LAN Power Supply With Battery Charger Module (RS485)  |  F.01U.271.517 1 Amp continuous rated; LAN monitored Multiple protected power outpu...

Bosch Solution 6000 LAN Power Supply 5 AMP + 2x BATTCHGR (RS485) | F.01U.275.894 5 Amps total combined output current Charge up to 2 x 7.2Ah or...

CM704B 8/16 Zone Expansion Module (RS485) | F.01U.271.515 LAN or locally powered Status and Zone Power LEDs Service code pad connection Separate ...

Solution Conettix IP Ethernet Module High security (128bit encryption) replacement for PSTN line Remote upload / download over IP and alarm repo...

Bosch Solution 6000 MyAlarm Plug-In 4G GSM/GPRS Plug on Modem With Antenna No 3G Fall Back! Allows Bosch 6000 To Send SMS and connection to MYAL...

4 x Form C relay contacts LAN monitored Status LED Service code pad connection Separate tamper input Automatic recognition by panel

A plug on 3G GSM/GPRS modem with antenna. The Bosch 3G GSM/GPRS module plugs directly on to the Solution 6000 alarm panel. All you need to do is ad...

Bosch Solution 6000 Add On Plug-In 8 Zone Expander Module | F.01U.275.888 Plugs on to the CM705PB zone expander Adds an additional 8 zones to the ...

RFRC-STR2 Radion Receiver Only  F.01U.318.378 Adds wireless capability to your Bosch alarm Genuine Bosch reciever Compatible with DSRF and Rad...

RF120 Bosch Solution 6000 2-Way RF Base Station Receiver | F.01U.359.236 2-Way 433MHZ RF Base Station Receiver VIA RS485 LAN Connection For SOL6K

Bosch Solution 6000 Universal LAN Zone Expander Module | F.01U.275.880 High security module with anti-substitution protection and resettable fuse ...

Allows industry standard Wiegand readers to connect to Solution 6000, Compatible with 26 to 40 Bit Wiegand readers

Bosch Solution Radion Wireless Transceiver Repeater | F.01U.389.906 Powered by DC power supply Includes 72 hour Lithium Ion battery back-up in ca...

The EnvisaLink 4 is a powerful TCP-IP based bus-level interface to DSC PowerSeries* panels. It allows you to view the status of and even control yo...

DSC Internet Security Alarm Communicator - TL280 Panel remote uploading/downloading via Internet Fully redundant Internet alarm communication In...

Adds 8 hardwire zones AUX power, 125 mA (PTC protected) Compatible with PC1616, PC1832 and PC1864 control panels

Adds 8 hardwired zones AUX power up to 125 mA (PTC protected)

Supports up to 128 wireless zones and 32 wireless keys – varies per panel Supports DSC PowerG devices Compatible with PowerG Repeater (PG9920) for...

Fully supervised for AC failure, low battery and AUX failure 4 programmable high current voltage outputs: rated at 1 Amp @ 12 VDC Output #1 can be...

8 on-board zones Expandable to 64 hardwired zones Expandable to 64 wireless zones 4 PGM outputs: expandable to 14 (PC5204, PC5208) Template progra...

DSC Envisalink PCLINK Cable for DSC DLS Software (for upload and download) and EYZEVL4-CG (using the Connect2Go portal)

Provides 8 low current (50 mA) PGM voltage outputs Compatible with PC1616, PC1832 and PC1864 control panels

Multi-frequency support for combination of 900/433 MHz receivers Compatible with PC1616, PC1832 and PC1864 PowerSeries control panels Can be used ...

Provides 8 low current (50 mA) programmable outputs

Allows extension of the PC-LINK connection by 50 feet(15 m) so communicator can be mounted in separate enclosure from panel Distance can be extend...

Fully supervised for AC failure, low battery and AUX failure Provides up to 1 Amp @ 12 VDC Compatible with HS2016, HS2032, HS2064, HS2128 control ...

Fully supervised for AC failure, low battery and AUX failure PC5204 adds 4 programmable high current voltage outputs: rated at 1 Amp @ 12 VDC, out...

NX1248 EchoStream 48 Channel Inovonics Wireless Receiver Allows you to add up to 48 Inovonics transmitters to your NX/Reliance alarm panel Dive...

Hills Reliance Smart Card Reader

Reliance 4G & Wi-Fi Router (Board Only) The module is supplied with SIM cards installed for connection to the UltraSync enabled control room ...

Interlogix Aritech 80PLUS 433MHZ Wireless Receiver Module Reliance XR Pro The NXG-433 wireless receiver adds wireless capabilities to the Hills Rel...

Satel 4G GSM Universal Multi-Purpose Communication Module 8 Programmable inputs (NO, NC) 4 Outputs (OC) controlled by SMS / CLIP / DTMF / GX CONT...

Suprema Lift Controller Module 12 Output Relays onboard Up to 16x OM120 Modules can be connected to a AE-MU or AE-MC, using a RS-485 daisy chained...

Relay boards are connected to a ten-way plug on the Challenger, Access Controllers, or DGP's to expand relay capacity. The TS0840 provides an addit...

The 8-input expansion module adds eight inputs to the Tecom range of Data Gathering Panels (DGPs). This provides an inexpensive way to increase the...