Skip to content

Tactical* 13.5VDC, 10A Switchmode Supply With High Output Charger, AC Fail & Low Batt Outputs - Module Only ]275L x 145W x 83H MM ]. Total Output 11.4A. Temperature Rating 0-50'C Above Ambient No Derating.

SKU TPS13-10DC

Notify me when back in stock

The TPS13-10DC is a fully regulated switch mode power supply providing 13.5 volts DC at 10 Amps. Due to its switch mode design, the TPS13-10DC generates significantly less heat than conventional power supplies.

TPS13-10DC features very low noise at full load with overload, short circuit and over voltage shutdown protection and is configured with a 13.8VDC 1.4A battery charger.

A removable 10 way connector provides outputs for DC Load, Battery Charger, Mains Fail Relay & Low Voltage / Battery Fail Relay Output.

Equipped with an AC fail relay and Green LED indicator which changes state upon loss of 240V AC mains power, the low battery relay and Red LED indicator are only functional during a mains power failure and will operate when the battery voltage reaches 10.5V.

Input Voltage240Vac (+6% / -10%) 50 Hz
Input Current1.4A @ Full Load
Output Voltage13.5Vdc
Output Channels1
Output per Channel10A
Output Ripple<50 mVp-p @ full load

Battery Charger13.8Vdc @ 1.4A
AC Fault RelayC-NC SPST contacts rating 1A 30Vdc
AC On IndicatorGreen LED Illuminates Mains ok
Low Battery Fault RelayC-NC SPST contacts rating 1A 30Vdc
Low Battery Fault IndicatorRed LED Illuminates on fault
Working Temperature0 – 50°C “Without De-rating”
Efficiency83% at rated output
Dimensions275L x 145W x 83H mm
Weight<2Kg approx
EMC StandardsAS/NZS CISPR 11:2004 (Class B)
Safety StandardsAS/NZS 60950.1:2015
Certificate of ApprovalASA-194021-EA
Please Contact Zankap